|
|
| OmniSwivel
International
Adapters and Gas Blocks |
Scuba
Center is an authorized OmniSwivel Dealer.
This is your assurance that your equipment will come with the full
manufacturer's warranty. |
|
OmniSwivel
International (originally named “M&J Engineering”) is one of the
original high-end corporate manufacturers for the diving industry and goes
back to the early 1970’s. The companies focus from its inception has
always been “How to make diving safer and easier for the diver”.
OmniSwivel
International is designed to research and develop high end component
products for the recreational scuba, technical and re-breather diving
industry.
|
| Superior
Quality |
Electroless-Nickel
Plating |
|
| Precision
Tooling |
Viton
O-Rings |
Made
in the USA |
| Solid
Brass Construction |
Use
Only ”Christo” Lube |
|
|
|
|
AGA Adapters
and Accessories |
|

|
AGA Dust Cap and Plug Set:
DS-A |
Price:
$27.99
|
|

|
AGA
Regulator Elbow 98 degree:
EL-A
AGA
Female thread to 9/16"-18 Male
thread.
98 degree offset elbow.
Adapts a standard
low pressure hose to an AGA
FFM. |
Price:
$49.99

|
|
AGA
OmniSwivel listed below
|
|
|
|
Gas Switch Blocks |
The OmniSwivel Gas Switch Block allows a diver to change
between two separate tanks without having to remove their
full face mask. The knob turns a full 180 degrees
ensuring no accidental switching during the
dive. Position one signifies the source
closest to the outlet is in use. Center position indicates
shut-off. In case of a second stage failure, a diver can turn
the flow off to mask and switch to an alternative regulator.
Shut-off position also prevents cross blending of gases during
a switch over. Final position shows GSB using secondary air
source. |
-
2ea
9/16"-18(adapters) Male Inlets. 1ea 3/8"-24
Female outlet.
-
Solid
brass construction for maximum durability.
-
Oxygen
Compatible Materials and O-Rings.
-
Inlet
adapters can be removed to expose 3/8"-24 female
ports. Allowing for flexibility of hose attachments.
-
Quick
Disconnects attach directly to the inlet port
alleviating the need for more adapters.
|
|
|
|
Gas
Switch Block: GSB-R
(right hand mounting) - Shown |
Price: $349.99

|
| |
Gas
Switch Block: GSB-L
(left hand mounting) |
Price: $349.99

|
|
|
|
High
Pressure Adapters / Blocks |
|
|
High Pressure Y Block: MB-X2
7/16"-20 Male to (2ports) 7/16"-20 Female |
Price:
$59.99 
|
|

|
L-Shaped
HP 1st Stage Pivot Swivel: PS-HP-1
7/16"-20 Male to 7/16"-20 Female.
High Pressure 1 outlet |
Price:
$49.99 
|
|
|
|
Low Pressure Adapters / Blocks
|
|

|
Low
Pressure Y
Block: MB-Z2
9/16"-18 Female
(Single Port) to 3/8"-24 Female (2 Ports)
(Connects to a standard 1st stage regulator hose, low pressure
hose)
Dimensions:
1-1/4"
L x 3/4" W x 1" H
Quick
Disconnect (QDM-CV) can attach directly to the 3/8"
female port |
|
Price:
$31.99  |
|

|
3/8"-24
F to 9/16"-18 M *LP* Adapter: SZF-YM |
Price:
$13.50  |
|

|
9/16"-18
M to 9/16"-18 M *LP* Adapter: SYM-YM |
Price:
$13.50  |
|
|
|
Low
Pressure Elbows
|
|

|
L
-Shaped 90 degree: PS-LP-2
3/8"-24
Male To (2ports) 3/8"-24 Female |
Price:
$49.99  |
|
 |
Regulator Elbow 98 degree:
EL-S
9/16"-18 Male
thread to 9/16"-18 Female
thread.
98 degree offset elbow.
Connects standard low pressure hose to standard 9/16"-18 second
stage regulator. |
Price:
$49.99
 |
|
|
|
NPT
Adapters |
|
|
|
|
OmniSwivels |
|
|
|

|
AGA
OmniSwivel: SW-A
AGA 2nd stage regulator to
standard low pressure scuba 9/16"-18 male (Converts
AGA mask to standard scuba hose fitting). |
Price:
$76.99
|
|

|
Poseidon
Extreme OmniSwivel: SW-PE
Poseidon
Extreme 2nd stage regulator to standard low pressure scuba
9/16"-18 male. |
Price:
$89.99
|
|

|
Standard
OmniSwivel: SW-S
Standard
9/16"-18 threaded 2nd stage regulator to standard low pressure
scuba 9/16"-18 male. |
Price: $76.99

|
|
|
|
Quick
Disconnects |
|
|
|
|
Shut-Off
Valves
|
| Using
a Shut-off valve can keep a diver from purging valuable gas
from the octopus during the dive. With a positive
locking design, this shut-off valve can not be accidentally
turned on and off. |
-
Designed
to fit between the octopus regulator and a standard hose.
-
Delrin
Sleeve provides for durable use as well as oxygen
compatible.
-
Made
with 02 compatible materials.
|
|
|

|
SOV-2
(Designed for Cold Water Use)
Standard
9/16"-18 threaded 2nd stage regulator to standard low pressure
scuba 9/16"-18 male.
3" L x 1"O.D |
Price: $49.99
 |
|
|
|
Related Items |
|
|
|
While these are excellent reference materials, in no way
should this information be considered a replacement for proper training
for the specific type of diving in which you plan to participate.
|