Highland Millwork Tank Bands and Cylinder Hardware | Scuba Center has been selling quality scuba diving and snorkeling equipment since 1973. You will find a wide selection of scuba and snorkeling equipment at both our Minneapolis and Eagan, Minnesota locations.

Highland Millwork Tank Bands and Cylinder Hardware | XS SCUBA ACQUIRES HIGHLAND MILLWORKS | Dan Babcock, President of XS Scuba is proud to announce the acquisition of Highland Millworks. Highland dual tank bands have long been the premier choice of diving professionals. Highland is known for uncompromising quality, exacting tolerances, safety and customer satisfaction. Joe McGrath, President and owner of Highland Millworks chose XS Scuba over several other potential buyers because of their commitment to preserving the quality that has become the hallmark of Highland bands. As Joe stated, “XS Scuba possesses the requisite knowledge required to build a Highland quality dual tank band. My reputation for safety and customer satisfaction was critical to the decision to sell Highland to XS Scuba.”

PADI TecRec courses are the quality benchmarks in the tec diving world due to their rigorous, yet logical, training sequence and the PADI educational materials that support them. TecRec courses are instructionally valid and have a seamless course flow that takes you from a new tec diver to one qualified to dive to the outer reaches of sport diving. Each level introduces you to new gear and procedures to extend your dive limits.

Scuba Center is a SAM ( formerly CCR ) registered supplier for the United States Government.  Our customers include: U.S. Coast Guard, U.S. Navy, U.S. Federal Government Agencies, Law Enforcement Agencies, Search and Rescue (SAR) Teams, Fire Departments, State and Local Government agencies, Commercial Diving Companies, School Districts, Television and Movie production companies, and many others.
CAGE Code:
3PHY4
  Home View Cart

Highland Millworks Cylinder Hardware

Highland Millwork describes their products as "Gear Management Solutions for Serious Divers"  From beautifully finished hardware to carefully engineered double bands and bolts sets, Highland has an eye for detail. They also offer a wide selection of high quality stainless stage bottle and harness hardware for all your technical diving needs.Highland Millworks describes their products as "Gear Management Solutions for Serious Divers"  From beautifully finished hardware to carefully engineered double bands and bolts sets, Highland has an eye for detail. They also offer a wide selection of high quality stainless stage bottle and harness hardware for all your technical diving needs.

Highland Millworks Twin Bands and Bolt Kits

Highland Millwork Twin Bands and Bolt Kits --

Highland Millworks SB725 -- 7.25" Stainless Double Tank Bands
2.5 " wide, Complete Stainless hardware included
Price: $155.00   add Highland Millwork SB725 | 7.25" Stainless Double Tank Bands to cart
Highland Millworks SB800 -- 8.0" Stainless Double Tank Bands
2.5 " wide, Complete Stainless hardware included
Price: $155.00   add Highland Millwork SB800 | 8.0" Stainless Double Tank Bands to cart
Highland Millworks SB803 -- 8.0" Heavy Double Tank Bands
3 " wide, Complete Stainless hardware included
Price: $169.00   add Highland Millwork SB803 | 8.0" Heavy Double Tank Bands to cart

Highland Millwork Delrin Thumbwheels | Milled from solid block of Delrin thermoplastic | Creates a strong, durable alternative to traditional wing nuts | www.xsscuba.com

Highland 3/8” Delrin Nuts (Pair), fits Highland 7.25" Bands

Price: $11.95   add Highland 3/8” Delrin Nuts (Pair), fits Highland 7.25" Bands to cart

Highland 5/16”Delrin Nuts (Pair), fits Highland 8" Bands

Price: $11.95   add Highland 5/16”Delrin Nuts (Pair), fits Highland 8" Bands to cart

http://www.xsscuba.com

Highland 3/8” Bolt Kit for SB725
Bolt length for BK725 is 5"

Price: $22.50   add Highland BK725 3/8” Bolt Kit for SB725 to cart

Highland 5/16” Bolt Kit for SB800 & SB803
Bolt length for BK800 is 5.5"

Price: $22.50   add Highland 5/16” Bolt Kit for SB800 & SB803 to cart


Highland Stainless DIN Plug | Precision machined from 316L stainless steel |

Highland Stainless DIN Plug: 316L stainless steel, Protects 200 and 300 bar DIN threads, Seals water out with Viton o-ring.

Price: $17.00   add Highland Stainless DIN Plug to cart

XS Scuba VP16 DIN Insert | www.xsscuba.com

Removable Spin-Out DIN Insert. Convert 200 BAR DIN valve to yoke. Viton o-rings.

Price: $13.00   add Highland Stainless DIN Plug to cart


Highland / XS Scuba WB550 "V" Weight Pouch | Add trim weight in the center groove of your backplate | http://www.xsscuba.com

WB550 - "V" Weight Pouch: Add trim weight in the center groove of your backplate, 11" center to center, Just pour in your lead shot of up to 7 lbs.

Price: $14.00   add WB550 "V" Weight Pouch to cart


Pony Mounts

  • 316 grade stainless steel construction

  • Adjustable length nylon webbing

  • Stainless steel cam buckle

  • HL409 - Designed for 4.4" diameter pony cylinders - Aluminum 8, 13, & 19 cu ft

  • HL412 - Designed for 3.2" diameter pony cylinders - Aluminum 6 cu ft

  • Quick detach

  • Designed for 6.9" to 8.0" diameter primary cylinder

  • Rubber feet to protect paint

  • Includes buckle pad to prevent tank scratching

HL409 - For 4.4" diameter pony cylinders
(
Aluminum 8, 13, & 19 cu ft_Aluminum 8, 13, & 19 cu ft)

Price: $94.95   add Highland HL409 Pony Mount for 4.4” Diameter Cylinder with Buckle Pad to cart

HL412 - For 3.2" diameter pony cylinders
(Aluminum 6 cu ft)

Price: $94.95   add Highland HL412 Pony Mount for 3.2” Diameter Cylinder with Buckle Pad to cart


Related Items
Faber Cylinders Gauges Harnesses & Wings
Oxygen Analyzers Regulators Valves

While these are excellent reference materials, in no way should this information be considered a replacement for proper training for the specific type of diving in which you plan to participate.