Scuba Center - Dive Rite Reels and Lift Bags -- Finger Spools, Jump/Gap Reels, Safety Reel, Primary Reel, Explorer Reel, Line Arrows, 50 lb and 100 lb Lift Bags.

Dive Rite Reels and Lift Bags

Scuba Center is an authorized Dive Rite Dealer.
This is your assurance that your equipment will come with the full manufacturer's warranty.

Reels are more than a spool of line; they are the connection to your safety. Whether it’s tethered to a Lift Bag, or leading you out of a long penetration, the functionality of your reel is a life and death matter. Nobody has more experience with reels than Dive Rite, and they have used that experience to design the largest selection of reels in the industry. From a simple finger spool, to the *5-Series Sidewinder models, Dive Rite has the reels to Dive it All!

The Dive Rite 5-series reels feature the latest anti-fouling design. A precision machined spool-to-handle tolerances, even #24 line cannot slip between the spool and the handle. A closed-end billet aluminum handle allows ambidextrous, lateral, or vertical deployment of line while helping to prevent accidental entanglement. The lock-down screw positioned to ride on the outer race of the spool allows precise drag or complete lockdown of the reel.

Register your Dive Rite warranty Online.

Dive Rite Reels

Dive Rite Reel Features

Adjustable Handle: The handle and frame of Dive Rite Primary and Safety Reels now come with a series of pre-drilled holes in the handle and frame. By unbolting the handle and frame from one another, and then re-bolting them in different positions, users can adjust handle height to better fit their hands and position the handle for right- or left-hand operation, or make a side-mounted handle.

Channeled Reel Handle: The top of the handle of all Dive Rite stainless reels (again, with the sole exception of the Jump/Gap Reel) have a molded-in channel. This makes them conform more naturally to the shape of your hand and helps better cradle light handles.

Positive Lock-Down Screw: The lock-down screw on Dive Rite Primary Reels and Safety Reels is positioned so that it passes through the frame and into a space between the spool's ribs. Even when fully extended, it will not touch the spool (or put unnecessary stress on it). Yet, because it rests between the ribs, it prevents any possible movement of the spool. The lock-down screw on the Explorer Reel accomplishes the same thing by fitting into one of six holes drilled into the side of the spool.

Permanent, Flush-Mounted Axle Assembly: On nearly all other reels, the axle assembly is essentially a stainless bolt that locked in place with a hex nut and lock washer. This creates the possibility of the reel going out of adjustment, becoming either too tight or too lose. Additionally, it creates the potential for salt or sediment to build up between the nut and the threads, permanently locking them in place.

The axle on the Dive Rite reels is permanently attached to the frame. The spool locks in place with a simple "E" clip. This results in a lower profile, eliminates the possibility of thread lockup and helps ensure that the axle will never go out of adjustment. It further simplifies the removal and replacement of the spool. This is not only helpful in sorting out line jams, it enables users to keep a number of different spools on hand, each carrying line of a different weight. Users can then select the spool that contains the line whose weight is best for a given dive, depending on their needs and the dive's objectives.

Small enough to stow in a pocket, finger spools can substitute for jump reels or safety reels.

Dive Rite Finger Spool
Price: $20.00
Model RE4800
(50 feet of #24 line)

Use this reel to make a temporary connection between the ends of permanent guidelines, or to "jump" to offshoot lines.

Dive Rite Jump/Gap Reel
Price: $44.00
Model RE4250
(50 feet of #24 line)

This model is used chiefly by cave and wreck divers as a back-up reel, or by cavern divers as their primary navigation tool. It has many other potential uses, in activities such as search and recovery, and recreational diver training.

Dive Rite Safety Reel
Price: $60.00
Model RE4100
(Cave -- 140 feet of #24 line)
Model RE4110
(Wreck -- 90 feet of #36 line)

Cave and wreck divers typically use this as their primary navigation reel; it has many other potential uses as well. Dive Rite's Primary Reels come standard with stainless steel snaps.

Dive Rite Primary Reel
Price: $84.00
Model RE4300
(Cave -- 350 feet of #24 line)
Model RE4310
(Wreck -- 250 feet of #36 line)

Redesigned Explorer reel incorporates several innovative features. There is both an adjustable drag and a positive lock-down screw. The handle facilitates single-handed operation.

Dive Rite SideWinder Explorer Reel
Price: $209.00
Model RE51900
(Cave -- 900 feet of #24 line)
Model RE51550
(Wreck -- 550 feet of #36 line)

Dive Rite Reel Drag -- Fits all late-model 4100- and 4300-series stainless reels (those that use a stainless "E" clip to keep the spool in place). -- Technical Diving Equipment

The Dive Rite Reel Drag fits all late-model 4100- and 4300-series stainless reels (those that use a stainless "E" clip to keep the spool in place). The drag consists of a lightweight metal disk, attached to a low-friction axle bushing. The drag assembly replaces the nylon bushing that normally sits next to the reel frame.

Dive Rite Reel Drag
Price: $8.82
Model RE4004

Replacement Reel Line
Model RE1040 (#24 - Cave Reels)	(One Pound Roll -- Approx. 840 feet)	Price: $30.73
Model RE1041 (#36 - Wreck Reels)	(One Pound Roll -- Approx. 540 feet)	Price: $30.73

Dive Rite Lift Bags

Lift and Marker bags have come a long ways since the days of their use as a means to float an object. In fact, many boat operators insist on you having a Lift Bag on every dive. The need to mark your position by attaching a Lift Bag to your Reel and sending it the surface can be of vital importance, so whether you choose to pop a bag from a deep wreck dive, want the boat to know your location as you float down the reef on a lazy drift dive, or need some lift to get that treasure to the surface, Dive Rite has the Marker/Lift bag to make sure you get the job done.

"Quick-Draw" Sleeve (included with Dive Rite Lift Bags) features mesh for easy drainage. By using a combination of snaps and quick links, you can easily attach this sleeve to the side or bottom of rigid back plates or Dive Rite TransPac harnesses for rapid deployment.

Integral dump valve, accessed by a convenient pull cord. The bag rolls easily featuring a Velcro closure and can easily clip off to your BC.

Dive Rite 50 lb Lift Bag $74.00
Model AC2785 -- Orange
Model AC2751 -- Yellow

Integral dump valve, accessed by a convenient pull cord. The bag rolls easily featuring a Velcro closure and can easily clip off to your BC.

Dive Rite 100 lb Lift Bag $79.00
Model AC2786 -- Orange
Model AC2752 -- Yellow

While these are excellent reference materials, in no way should this information be considered a replacement for proper training for the specific type of diving in which you plan to participate.