|
Apeks XTX50 Regulator
The XTX50 is for the discriminating diver who wants the benefits of
a feature-rich regulator at a moderate price. This popular first
stage has four medium-pressure ports all mounted on a rotating
turret. The over-balancing feature allows the medium pressure air in
the hose to increase at a rate faster than ambient pressure
resulting in superior performance. New XTX pneumatically balanced
second stage has left/right reversibility and a Diver Changeable
Exhaust (DCE) system. This system gives the diver the ability to
change from a large exhaust tee to a smaller exhaust tee. The large
tee provides the best exhaust bubble dispersion; the smaller tee is
lighter weight and compact. Both exhaust tees are included with the
regulator. This pneumatically balanced second stage has
diver-adjustable controls for opening effort and venturi control. |
|
Environmental Dry
Sealing system. Suitable for cold water use. |
|
 |
Apeks XTX50 Regulator:
Features 2 HP ports and 4 MP ports
Yoke first stage |
Price: $560.00
 |
|
Apeks XTX50 DS4 DIN Regulator
This regulator is often taken to the extremes and never
disappoints. This regulator is similar to the XTX50 mentioned
previously less the rotating turret. The compact first stage is
ideally suited for twin manifolds or for use on a single valve. One
high-pressure port and four low-pressure ports are positioned for
most common technical diving rigs. The over-balanced first stage
provides superior performance at deeper depths. First stage is
dry-sealed preventing the entry of contaminants as well as ice
formation on the main spring. The XTX50 second stage is
pneumatically balanced for very easy breathing. This pneumatically
balanced second stage has diver-adjustable controls for opening
effort and venturi control. |
|
This is the regulator
of choice for technical divers around the world. |
|
Environmental Dry
Sealing system. Suitable for cold water use. |
|
 |
Apeks XTX50
DS4 DIN Regulator:
Features 1 HP ports and 4 MP ports
300-bar DIN first stage |
Price: $525.00
 |
|
Apeks XTX200 Regulator
The XTX200 model is the flagship of the Apeks fleet of fine
regulators. It uses the proven “FSR” type first stage as found on
the ATX200. This XTX200 first stage features a new bright chrome
finish. The second stage, although shipped in a standard right-hand
configuration, can be reversed into a left-hand configuration by
your authorized technician. The large tee provides the best exhaust
bubble dispersion; the smaller tee is lighter weight and compact.
Both exhaust tees are included with the regulator. This
pneumatically balanced second stage has diver-adjustable controls
for opening effort and venturi control. |
|
Environmental Dry
Sealing system. Suitable for cold water use. |
|
 |
Apeks XTX200 Regulator:
Features 2 HP ports and 4 MP ports
Yoke first stage |
Price:
$710.00
 |
Apeks XTX200 Regulator:
Features 2 HP ports and 4 MP ports
300-bar DIN first stage |
Price:
$710.00
 |
|
|
Apeks
Alternate Air Sources |
Apeks Egress Octo.
Innovative, low profile design minimizes drag. The pneumatically
balanced valve provides superior performance for an alternate air
source, making it a perfect compliment to the high performing Apeks
regulators. Pneumatically balanced valve system. Unique 120° angle
between the mouthpiece and the hose, which is ideal for sharing air
with your buddy. Breathes smoothly when positioned right side up or
upside down. |
|
 |
Apeks Egress Octo.:
High visibility 36" yellow hose distinguishes your Egress hose from
your primary hose and is easily spotted in case of an out-of-air
emergency. |
Price:
$175.00
 |