XDEEP HYDROS | Scuba Center | Designed to exceed the expectations of demanding tec divers.


CAGE Code: 3PHY4

XDEEP HYDROS

Designed to exceed the expectations of demanding tec divers.

At XDEEP they are passionate about doing things better, improving and refining their products. They want BCD’s to be safer, to be robust and reliable and to be more comfortable for divers. XDEEP engineers and designers leave no stone unturned in the pursuit of this goal. From the overall design concept to the little details, everything is examined and improved. Once they have come up with the design, they obsess about identifying and using the best materials.

Scuba Center is an authorized XDEEP Dealer.
This is your assurance that your equipment will come with the full manufacturer's warranty.

XDEEP HYDROS

While the XDEEP HYDROS system might be easily recognizable, every element has been addressed to ensure an enhanced diving experience. Building all of the elements around a carefully calculated geometry, they significantly improved stability in the water.

XDEEP eliminated the ‘dead zones’ that trap air, increasing drag or affecting buoyancy. They ensured you have great access to your valves through a careful top wing design. Holding flat and expert trim in this wing is made easy, whether you are a new technical diver or have hundreds of decompression dives and want the security and comfort of the best system possible.

Trim and Stability to meet the most critical eye:

Learning how to hold good trim and a stable position in the water is often the hardest skill for a new technical diver. For an experienced technical diver they want their equipment to help, not be something they have to compensate for. The XDEEP HYDROS was designed so that the buoyancy in the wing perfectly matches the center of gravity of the gas in your twinset. Irrespective of the inflation level of the wing, or the remaining cylinder pressure, the system trim will not change during the dive.

Valve Shutdowns – faster and safer:

The last thing you want between you and your valves is a flap of wing that slows down your response to a problem. Shutdowns and valve management have been improved by reducing the volume of the wing in the valve area, and through the area where you want to route your hoses. Its easier to configure a clean and tidy hose routing, leaving your valves clear and accessible.

Reduced drag but the same buoyancy:

Smaller contour wings have less drag and a lower risk of entanglement. In classic twinset BCD designs if you reduce the contour of the wing, then you lose overall buoyancy. Not in the XDEEP HYDROS. By minimizing the dead zone in the HYDROS from the central part of the bladder, XDEEP has reduced the overall wing contour and kept all the buoyancy you need. A bit of lateral thinking!

Comfortable and high up at the surface:

It is a challenge to design a wing that holds you in perfectly flat trim underwater, yet holds you upright and high at the surface. Most designs want to push your face back underwater. In the XDEEP HYDROS the design ensures that the majority of the wing and therefore buoyancy is kept beneath the surface. Even loaded with two full stages and gear for a deep technical dive, HYDROS will hold you high and comfortable out of the waves.

XDEEP HYDROS features:

Classic backplate with the harness made of a single piece of webbing Harness (fully assembled) Available with Aluminum or Stainless backplate HYDROS 40 lb Wing or HYDROS 50 lb Wing Classic straight crotch strap
Backplate Options: Aluminum Stainless Steel

Optional Modular Weight System:
To truly be at one with your equipment, your weight system must be perfectly balanced, be secure and easy to configure and use. The modular weight system in the XDEEP NX series means you can confine your weight belt to history. Tailor your weight distribution for the diving you are doing. From a couple of pounds needed in the warm sun, to the extra lead needed in cold water diving, you can select the pockets that best suit your needs.

User's Manual

Several color options available. Add a splash of color into your dive gear, but keep the standard components and at a standard price. Colors other than black are special order and require a few weeks lead time.

Price: $579.00-$599.00

Want even more freedom of choice?

If standard sets or colors are not enough, use the XDEEP Tuneup Tool and create your own amazing custom XDEEP HYDROS. Design the perfect system online then email it to Scuba Center for ordering. Three easy steps:

1. Create your own BCD in the XDEEP configurator. Design it according to your own preferences and needs.

2. Print the order form, sign it and email it to Scuba Center.

3. Allow for approximately 6-8 weeks for production of your customized XDEEP BCD after which you can pick it up from Scuba Center or we can arrange shipping.

Related Items

BCDs	Dry Suits	Full Face Mask
Lights	Regulators	Water Rescue Equipment

While these are excellent reference materials, in no way should this information be considered a replacement for proper training for the specific type of diving in which you plan to participate.