The Interspiro line of AGA
diving full face masks (ffm) are second to none! All have been field
proven by Government, Military, Commercial & Public Safety Teams
around the world. Interspiro has 70 years of experience as a
groundbreaking innovator of respiratory protection for non-breathable
environments. They develop, manufacture and market respiratory and
auxiliary equipment for firefighting, work in hazardous environments and
professional diving.
The Divator
Mask is known around the World as the "AGA Mask", the reason
behind this is that the first generation of this full-face mask was
developed when Interspiro was still a part of the AGA Corporation. Today
the latest generation of the Divator Mask is the Worlds most sold
full-face mask, and we dare say one of the finest and most versatile
full-face masks ever manufactured. Divator MK II has been tested by the US
Navy Experimental Diving Unit (NEDU) and is approved for US Military use.
Military
organizations, fire and rescue services, police forces, coast guards and
professional divers around the World prefer the AGA.
Scuba
Center is an authorized Interspiro AGA Divator Dealer.
This is your assurance that your equipment will come with the full
manufacturer's warranty.
AGA AW-1
Weight Kit -- This makes the ffm
completely natural in the water. Divator (AGA) weight Kit.
Ready to install on all AGA FFM (can be used w/ABV-1 & 2).
(AGA mask not included)
Price:
$159.00
Full Face Mask
Bag -- The OTS designed Mask Bag prolongs the life of your AGA full
face mask. Large net vent top provides greater air circulation which
aids drying. Dry compartment on the back perfect for storing an AGA
supply hose or other small accessories. It also has two mesh storage
pockets; one found on the front and secured with a zipper and the
second inside secured with a small Velcro tab. The bag is made out
of 420D nylon with polypro webbing, corrosion resistant nylon
hardware, closed cell foam padding, shoulder strap and a rubberized
shoulder pad.
Price: $29.95
Innovative Dive Equipment Inc. AGA Accessories
Innovative Dive Equipment began in 2004.
Owner Sam Lapinsky is an active Public Safety Diver, and Public
Safety Scuba Instructor for a large Sheriff's Department in Florida,
and before that a salvage diver. Over the years he had ideas for
simple devices to make it easier to complete difficult tasks with a
little more ease while working underwater. Innovative Dive Equipment
is now bringing some of these ideas to market, hoping that other
divers will benefit from their use.
Some items special order. Please allow additional lead
time
AGA Divator MK
II S-Sun LED Light Kit Complete
Accessory rail system easily attaches to AGA Divator full face mask
and makes it possible to mount various devices to the side of the
mask. This version has the S-Sun LED Diver Headlight mounted to the
slide.
Includes one rail and one light. No tools needed.
Price:
$279.00
AGA Divator MK
II S-Sun LED Light Kit Articulated Complete
Accessory rail system easily attaches to AGA Divator full face mask
and makes it possible to mount various devices to the side of the
mask. This version has the S-Sun LED Diver Headlight mounted to an
articulated rail holder.
Includes one rail and one light. No tools needed.
Price:
$295.00
S-Sun LED Light
(only)
The S-Sun Diver Head Light
is a compact five LED dive light. The light is produced by super
white led's that produce 500 candle power. The light will burn for
approximately 12 hours on two double AA batteries. The light output
is considerably brighter then what you would expect from a light its
size.
The light is rated to 165’ of sea water, and it has a unique
pushbutton on/off switch. The first time the switch is pressed the
light is on full power. Press the switch again, and the light is now
operating on reduced out put. The third time the switch is pressed,
the light goes into a flashing mode (distress). On more press of the
button turns the light off. If pressed and held for 5 seconds, the
switch is deactivated to prevent the light from turning on if the
button is accidentally depressed while in storage, or while
traveling. Holding the button depressed for 5 seconds will return
light to normal operating mode.
Price:
$46.00
AGA Divator MK
II Welding Visor Kit Complete
Welding visor is mounted to the Interspiro mask using the Accessory
Rail System. Once the Rail System is mounted to the mask the welding
visor can be quickly installed, or removed, by pressing the release
buttons located on both sides of the visor hinges. The visor can be
rotated up for an unobstructed view when necessary (uses standard 2”
X 4.25” shielding glass). Lights and cameras that are mounted to
“Slides” can be slid onto the Accessory Rails while the visor is
mounted.
While these are excellent reference materials, in no way should this information be considered a replacement for proper training for the specific type of diving in which you plan to participate.